Revestimiento resistente al agua

Transparente waterpCubierta recubrimiento
Transparente waterpCubierta recubrimiento

Transparente WaterpCubierta Recubrimiento - Sellado transparente for…

Product OverviewClear-Seal waterproof paint for exterior walls, is a special polymer copolymer emulsion, modified by a variety of additives developed from water-based environmentally friendly waterproof paint, Clear-Seal paint, does not change the appearance of the original decorative layer. The...

Product Overview

Clear-Seal waterproof paint for exterior walls, is a special polymer copolymer emulsion, modified by a variety of additives developed from water-based environmentally friendly waterproof paint, Clear-Seal paint, does not change the appearance of the original decorative layer. The recubrimiento film possesses good flexibility, strong weather resistance as well as water resistance.

Especificación de embalaje

10kg/ barril, 20kg/ barril


 769fc8ffedfbfea249161ab8bdddce8

Ámbito de aplicación

Es adecuado para la protección de fugas de pared de baldosas, hormigón o superficies pintde varios edificios.

Características del producto

Clear-Seal recubrimiento film: the product is colorless, turn into Clear-Seal after film formation, and does not affect the original wall decoration effect and the original appearance.

Strong weather resistance: high low temperature resistance, UV resistance, acid and alkali resistance, no chalking, no yellowing.

Strong adhesion: with concrete, stone, ceramic tile, old paint and other substrates are strong bonding performance.

Good mechanical properties: flexible recubrimiento film, with good flexibility, can cover the wall micro-cracks.

Efficient water blocking: excellent water resistance and water-white resistance, no swelling with water, good waterproof effect.

Convenient construction: one-component material, Out-of-the-barrel, can be sprayed, rolled, brushed.

Environmental protection and safety: water used as a dispersion medium, non-toxic, tasteless, non-polluting environment, cold construction, safe operation.

Proceso de aplicación

Base surface cleaning

The surface shall be smooth, solid, no floating ash, no loose, no oil, for the surface of the chalking of the base, need to first remove the surface material with an iron brush or sandpaper clean; loose cracked parts should be chiseled and repaired in advance, tile base should first clean up the gap, the depth of about 5 mm, and then clean the tile surface. In the waterproof construction before, the grass-roots level must be dry, no water.

Pintura para la construcción

Después de que la superficie de la base esté seca, la primera construcción deberá ser lo más uniforme posible;

Después de que la primera película de revestimiento esté completamente seca, se llevará a cabo la segunda construcción; La dirección de la construcción será escalon.

Film Protection

After the construction of the waterproof layer is completed, all parts of the entire project shall be carefully checked, especially for the exterior tile gaps, the paint shall not have missed brushing, layering, warping, cracking and other phenomena. Find out the cause if there problem arise, and fix it in time.

Caution

The construction is strictly prohibited in rainy, snowy and windy weather of grade 5 or above.

The temperature of construction environment shall be 5~35°C under ventilation condition, construction in wet and cold weather is strictly prohibited.

It is strictly forbidden to add water to the paint to dilute it.

After construction, it is strictly forbidden to meet water before the paint is dried.

When it is winter or the temperature is too low, pay attention to material insulation.

In order to ensure the best waterproof effect, the scope of painting should be slightly larger than the area where the leakage occurs, to achieve complete coverage of the effect of closure.

Packaging and storage

The products are non-flammable and explosive materials, and can be transported as general cargo.

Different types of products shall be stacked separately and shall not be mixed.

Evite el sol y la lluvia, evite colisiones y preste atención a la ventilación.

Almacénelo en un almacén fresco y seco a una temperatura de 5~35°C y evite la congelación.

En condiciones normales de transporte y almacenamiento, el período de almacenamiento es de al menos 6 meses a partir de la fecha de producción. Después de 6 meses, el material puede ser utilizado de nuevo después de pasar la prueba.

Contacto Information

ellen@waterproofingbest.com

Hongyuan Waterproof Technology Group Co. Ltd.

Parque Industrial de Taitou, Shouguang, Weifang, provincia de Shandong, China

Tel:+86 15163601048

Company website: www. waterproofingbest.com

¡Póngase en contacto!

Hongyuan Waterproof ofrece soluciones de impermeabilización de alta calidad y soporte técnico.

Llámenos

+86 15163601048

Escríbanos

ellen@waterproofingbest.com

Atención al cliente
Servicio de impermeabilización
WhatsApp Correo